Last reviewed November 20, 2026

How much does a gravel driveway cost?

National 2026 guides split into two camps: about $1–$4 per square foot installed (LawnStarter, HomeAdvisor) and $4–$10 per square foot (HomeGuide). The gap is mostly about how deep the stone goes and how much grading is included. We show both, with dates, and do not average them.

The published ranges

Source and dateInstalled, per sq ftAverage or typical job
LawnStarter, updated Oct 5, 2026$1–$3 (materials and labor)$1,500 average; $600–$1,800 typical
HomeAdvisor, updated Jun 17, 2026$1.25–$4.00About $1,800; most $500–$3,500
Angi, updated Oct 21, 2026Not stated as one installed range$1,800 average; most $500–$3,500
HomeGuide, Dec 18, 2025$4–$10 (labor and materials)$4,000–$10,000 for 10 × 100 ft

What each page adds:

Two notes before you use these. Angi and HomeAdvisor belong to the same company, and their headline figures ($1,800 average, $500–$3,500) are identical, so treat them as one data point, not two that agree. Angi’s page lists gravel at “$1 to $10 per square foot before installation” next to a size table that works out far lower per square foot. We do not try to reconcile that.

Why HomeGuide is two to four times higher

We cannot see any publisher’s underlying quotes, so this is a reading of what each page says it includes, not a verdict:

Practical reading: the $1–$4/sf camp is closer to stone delivered and spread on ground that is already reasonably graded. HomeGuide’s $4–$10/sf is closer to a new, layered driveway with grading. Ask each bidder for the depth, the number of layers, and whether grading and fabric are in the price.

Published ranges applied to common sizes

The next table multiplies each source’s per-square-foot range by the area. It is our arithmetic on their ranges, not a quote from any of these sites. HomeGuide and HomeAdvisor’s own totals above are what they actually published.

Applied per-square-foot ranges (installed)
Size (sq ft)At $1–$3/sf (LawnStarter)At $1.25–$4/sf (HomeAdvisor)At $4–$10/sf (HomeGuide)
20 × 20 (400)$400–$1,200$500–$1,600$1,600–$4,000
12 × 50 (600)$600–$1,800$750–$2,400$2,400–$6,000
16 × 40 (640)$640–$1,920$800–$2,560$2,560–$6,400
10 × 100 (1,000)$1,000–$3,000$1,250–$4,000$4,000–$10,000

How much stone, and what the stone alone costs

Volume is length × width × (depth in inches ÷ 12) ÷ 27. Weight uses the 1.4–1.5 tons per cubic yard band from HomeGuide’s gravel price guide (Dec 19, 2025). Orders below include 10% extra; HomeGuide’s driveway page suggests ordering 10% to 15% extra for compaction, spillage, and settling. The stone cost column applies HomeGuide’s crushed stone price of $30–$60 per ton, including delivery (Dec 18, 2025) — again our arithmetic, and no labor, grading, or fabric.

Order with 10% extra at 1.4–1.5 t/yd³
DrivewayAt 4 inAt 6 inCrushed stone at 6 in, $30–$60/ton
20 × 205.43 yd³ ≈ 7.6–8.1 t8.15 yd³ ≈ 11.4–12.2 tabout $340–$730
12 × 508.15 yd³ ≈ 11.4–12.2 t12.22 yd³ ≈ 17.1–18.3 tabout $510–$1,100
16 × 408.69 yd³ ≈ 12.2–13.0 t13.04 yd³ ≈ 18.3–19.6 tabout $550–$1,170
10 × 10013.58 yd³ ≈ 19.0–20.4 t20.37 yd³ ≈ 28.5–30.6 tabout $860–$1,830

Check: HomeGuide says one ton covers about 60 sq ft at 4 inches, or about 16.7 tons for a 1,000 sq ft driveway before extra. Our geometry gives 12.35 yd³, about 17.3–18.5 tons before extra, for the same driveway. Run your own size and depth in the gravel calculator.

Stone price by type

Per-ton prices also disagree by source. Two dated lists:

TypeHomeGuide (Dec 18, 2025), incl. deliveryAngi (Oct 21, 2026)
Crusher run$25–$50—
Crushed stone$30–$60Crushed granite $25–$50; crushed limestone $30–$40
Crushed shell$40–$80$20–$90
Pea gravel$50–$100$20–$80
River rock$60–$150$45–$100

HomeGuide advises against pea gravel and river rock as the main driveway surface because rounded stones shift under tires, and recommends 3/4- to 1-inch crushed stone over a crusher-run base. HomeGuide’s general gravel guide (Dec 19, 2025) lists material at $10–$50 per ton, and Angi uses the same $10–$50 per ton headline.

Extras that are usually separate

Comparing with a paved surface? See concrete driveway cost and concrete vs. asphalt. The concrete figures are installed per-square-foot ranges from different publishers and dates, so compare ranges, not single numbers.

Related

Gravel calculator · Cubic yards · Concrete driveway cost · Concrete vs. asphalt · Methodology

FAQ

How much does a gravel driveway cost per square foot?

Published 2026 figures split: LawnStarter (Oct 5, 2026) $1–$3/sf for materials and labor, HomeAdvisor (Jun 17, 2026) $1.25–$4/sf, and HomeGuide (Dec 18, 2025) $4–$10/sf for labor and materials. The difference mostly tracks depth, layering, and how much grading is included.

How much is a gravel driveway for a 2-car garage?

HomeAdvisor (Jun 17, 2026) puts a 16 × 40 ft (640 sq ft) 2-car driveway at around $800–$2,560. LawnStarter (Oct 5, 2026) gives a typical two-car cost of $1,500. Applying HomeGuide’s $4–$10/sf to 640 sq ft would give $2,560–$6,400 — our arithmetic, not a HomeGuide quote.

How many tons of gravel for a driveway?

Tons = length × width × (depth in inches ÷ 12) ÷ 27 × 1.4 to 1.5. A 12 × 50 ft driveway at 6 inches is 11.11 yd³, or 12.22 yd³ with 10% extra, about 17.1–18.3 tons at HomeGuide’s 1.4–1.5 t/yd³ band.

How deep should a gravel driveway be?

HomeGuide (Dec 18, 2025) calls 5 to 6 inches in layers the minimum, and 8 to 12 inches for trucks or RVs. LawnStarter (Oct 5, 2026) says at least 4 inches, with experts recommending 8 to 12. Follow your installer and local requirements; PadCalc does not set a required depth.

Get free quotes (not live yet)

This form is a placeholder and does not collect or send anything. A local contractor quote is the only real price.

TODO: Connect a contractor lead program (Home Depot Installation, Lowe’s, or a lead network) before enabling this form.