Headline ranges
| Pressure-treated pine | Composite | |
|---|---|---|
| Installed, per sq ft | $25–$50 | $40–$80 |
| 12×12 (144 sq ft) | $3,600–$7,200 | $5,750–$11,500 |
| 20×20 (400 sq ft) | $10,000–$20,000 | $16,000–$32,000 |
| Material only, per sq ft | $14–$28 (pine, on the build-a-deck page) | $16–$32 |
| Labor only, per sq ft | $11–$22 | $24–$48 |
Sources: HomeGuide, “How Much Does It Cost to Build a Deck? (2026)”, dated February 10, 2026 (pine figures, and a material table that also lists composite at $40–$80/sf). HomeGuide, “How Much Does Composite Decking Cost? (2026)”, also February 10, 2026. The pine size table is footnoted for pressure-treated pine decks attached to a 1-story home. The composite size table is footnoted for attached ground-level and elevated composite decks. Read those footnotes — a second-story or multi-level composite deck is listed higher ($80–$100/sf and $90–$130/sf) on the composite page, and a detached floating composite deck lower ($30–$40/sf).
The same footprints
| Size | Sq ft | PT pine | Composite |
|---|---|---|---|
| 8×10 | 80 | $2,000–$4,000 | $3,200–$6,400 |
| 10×10 | 100 | $2,500–$5,000 | $4,000–$8,000 |
| 10×12 | 120 | $3,000–$6,000 | $4,800–$9,600 |
| 12×12 | 144 | $3,600–$7,200 | $5,750–$11,500 |
| 12×16 | 192 | $4,800–$9,600 | $7,680–$15,350 |
| 16×16 | 256 | $6,400–$12,800 | $10,250–$20,480 |
| 20×20 | 400 | $10,000–$20,000 | $16,000–$32,000 |
| 24×24 | 576 | $14,400–$28,800 | $23,000–$46,000 |
The 12×12 composite total ($5,750–$11,500) is not exactly 144 × $40–$80 ($5,760–$11,520); we quote the table, not a recalculation. Other hardwoods on the pine page (cedar $30–$47, redwood $28–$54, ipe $50–$70) sit between or above pine and overlap composite. They are not “the wood option” in the headline comparison.
Maintenance notes we can cite — and lifespans we will not invent
HomeGuide’s build-a-deck page says builders advise staining and sealing pine every year. Cedar and redwood are described as needing annual resealing; ipe is described as lasting 40 to 70 years with high density and minimal maintenance. The composite page emphasizes higher labor because the material takes more careful assembly, not a lifespan number we will transcribe if we cannot point to a clear figure on that page. We will not invent a “composite lasts X years so it pays back in year Y” model.
Board counts, waste, and joist counts — not a cost or a span design — are in the deck calculator. Enter the actual face width (a dressed 6-inch board is often 5½ inches). Waste defaults to 10% as a field you can change.
Related
Deck calculator · Fence · Concrete · Sources
FAQ
How much more is a composite deck than a wood deck?
On HomeGuide’s February 10, 2026 pages, composite is $40–$80/sf installed versus $25–$50/sf for pressure-treated pine. A 12×12 is $5,750–$11,500 versus $3,600–$7,200; a 20×20 is $16,000–$32,000 versus $10,000–$20,000. The bands do not overlap at those listed sizes, but a mid-range pine job can still meet a low-end composite job if the scopes differ.
Do those prices include the frame?
Yes. HomeGuide describes them as installed prices including the joist-support base / substructure, not decking boards alone. Material-only and labor-only bands are listed separately in the table above.
How many boards do I need?
That depends on actual board width, gap, and length. Use the deck calculator; it does not apply these installed cost ranges automatically.