How many posts, rails, and pickets?

This tool counts pieces for a single straight run. It is not a structural design, a wind-load check, or a local-code review. Spacing is a product and code decision — many systems are sold at 6 or 8 ft on center, but you should confirm with the manufacturer and your building department.

Project details

Posts = ceil(run ÷ spacing) + 1, which includes both end posts. Leave picket width blank if you only need posts and rails. For concrete in the holes, open the fence-post concrete calculator.

Enter the dimensions to see a planning estimate.

How this is calculated

What this counts — and what it does not

For an 80 ft run at 8 ft spacing you get 10 sections and 11 posts, plus 20 rails if you set two rails per section. Pickets, if you enter a width, are the run length divided by (picket width + gap), rounded up. A gate, a corner, or a change in grade needs its own posts; this calculator does not add them automatically.

We could not independently load a current national installed-fence cost table (the HomeGuide fence cost page did not return usable content when we retrieved it on November 19, 2026). This page therefore does not invent a cost per linear foot. Use the piece counts to price materials locally, and get contractor bids for labor.

Hole size and depth are not assumed here. QUIKRETE’s Fast-Setting data sheet offers manufacturer tips (a hole about three times the post diameter, and a depth of about one-third of overall post height) — those are tips, not code. Frost-depth and wind-load rules are local. Work the concrete volume on the fence-post page, where we also compare QUIKRETE’s two-bag example with the geometry of that same hole.

FAQ

How many posts do I need for a 100-foot fence?

At 8 ft spacing, ceil(100 ÷ 8) + 1 = 14 posts. At 6 ft spacing, ceil(100 ÷ 6) + 1 = 18 posts. Add extras for corners and gates.

Is 8-foot spacing a code requirement?

No. Many residential panels are sold at 6 or 8 ft, but post spacing is a product and code decision. Confirm with the manufacturer and your building department.

How much concrete per post?

It depends on the hole and the post. Use the fence-post calculator, which subtracts the post from the hole. We do not hide a single bag count behind this tool.

Related

Fence-post concrete · Concrete · Deck · Sources