Two metros, two pages, not a state average. The mid-points happen to sit close together ($6,458 in Tampa, $6,490 in Orlando), but the size tables, per-square-foot language, demolition rates, and even the “how we got this data” sections are not identical. Read them as two sources.
Tampa figures from Angi (May 5, 2026)
Source: Angi, “How Much Does a Concrete Driveway Cost in Tampa, FL? [2026 Data]”, updated May 5, 2026.
- Average project cost $6,458, with most projects $2,724–$14,631.
- The size section also says $8–$20/sf, and that totals often run $2,700–$14,500 including removal.
- Demolition is listed at $2.90–$5/sf (a 2-car average of $500–$2,800). Grading and site prep for new installs $3–$8/sf. Florida sandy soil, the page says, needs a proper sub-base with compacted fill, adding $1–$2/sf.
- Hourly labor is listed at $50–$55. Permit fees, when required, $150–$350.
| Size | Sq ft | Range | Average |
|---|---|---|---|
| 10×20 | 200 | $1,600–$2,200 | $1,900 |
| 12×24 | 288 | $2,300–$3,200 | $2,750 |
| 20×20 | 400 | $3,200–$4,400 | $3,800 |
| 24×24 | 576 | $4,600–$6,300 | $5,450 |
| 24×36 | 864 | $6,900–$9,500 | $8,200 |
The Tampa page includes Angi’s “How Angi Gets Its Local Cost Data” section: national averages adjusted with BEA Regional Price Parities. Treat the Tampa figures as modeled estimates.
Orlando figures from Angi (May 5, 2026)
Source: Angi, “How Much Does a Concrete Driveway Cost in Orlando, FL? [2026 Data]”, updated May 5, 2026, written by a different Angi contributor than the Tampa page.
- Average project cost $6,490, with homeowners paying $2,738–$14,703.
- Per-square-foot language on this page is $5–$21 — a wider (and lower-starting) band than Tampa’s $8–$20 note.
- Demolition $5–$8/sf, with hauling and disposal $80–$150 per ton. Labor $40–$90 per hour or $3–$6/sf. Permit fees $100–$300, with additional fees if a structural-engineer inspection is required.
- The page emphasizes Central Florida drainage, sandy subgrades, heat, and humidity as schedule and prep factors — qualitative context, not a dollar multiplier we would invent.
| Size | Sq ft | Range | Average |
|---|---|---|---|
| 10×20 | 200 | $1,620–$3,040 | $2,330 |
| 12×24 | 288 | $2,330–$4,360 | $3,350 |
| 20×20 | 400 | $3,240–$7,200 | $4,660 |
| 24×24 | 576 | $4,800–$8,720 | $6,690 |
| 24×36 | 864 | $7,000–$12,600 | $10,090 |
The Orlando page’s “How Angi Gets Its Cost Data” section is worded differently: it describes surveying Angi customers and pairing that with other research (it names the U.S. Bureau of Labor Statistics, academic journals, market studies, and expert interviews). It does not repeat the BEA RPP paragraph used on the Tampa, Houston, and Los Angeles pages. We disclose that difference instead of assuming the same method.
National context
Angi’s national driveway average is $6,400 (guide updated Oct 29, 2026). Both Florida metros’ modeled or reported averages sit close to that figure. For HomeGuide and Concrete Network national installed ranges, see the national driveway guide.
Related
National driveway cost · Texas · California · Florida · Cost per yard · Concrete vs. asphalt · Calculator · Methodology
FAQ
How much does a concrete driveway cost in Tampa?
Angi (May 5, 2026) lists an average of $6,458 and a range of $2,724–$14,631, with a size table from a 10×20 at $1,600–$2,200 up to a 24×36 at $6,900–$9,500. Angi describes the Tampa figures as national costs adjusted with BEA regional price parities.
How much does a concrete driveway cost in Orlando?
Angi (May 5, 2026) lists an average of $6,490 and a range of $2,738–$14,703, and $5–$21/sf. The Orlando size table is wider than Tampa’s. The Orlando page describes its data method differently (customer surveys plus other research) and does not repeat the RPP paragraph.
What is the average cost in Florida?
We do not publish one. Two metro mid-points are not a state average, and we will not invent one.
Get free quotes (not live yet)
This form is a placeholder and does not collect or send anything. A local contractor quote is the only real price.